Hadco 1010-H Beacons

Hadco 1010-H BeaconsClick here to view Hadco finish options.BeaconFixture Type: BeaconsFinish: BronzeDurable powdercoat finish electrostatically applied and bonded by heat fusion thermosetting, to die cast aluminum. Composite beacon HID and fluorescent housing are color impregnated bronze. Cast bronze is natural bronze finish.Material: AluminiumVoltage Type: Line VoltageLamping A19Socket: Incandescent: medium base. Fluorescent: GX23-2 base. HID: medium base.Housing: Die-cast aluminum, or single piece compression molded reinforced polyester composite housing, or natural cast bronze.Volt/Watt: 120V/100WWiring: N/AMounting: Beacons are partially recessed. Potting compound must be used to seal the conduit wire entry.Upper housing/Louvers: Die-cast aluminum, or injection molded polyester composite resin, or natural cast bronze. Stainless steel screws in roof for easy top access for relamping.Lens: Borosilicate glass refractor lens, fully gasketed top and bottom.Electrical: Fluorescent uses 120V core and coil NPF ballast, rated at 0?C starting temp. Other lamp options and wattages are available. Consult factory for additional fluorescent, or HID options.Gasket: Molded silicone gasket seals glass, top and bottom, and prevents moisture intrusion into the fixture.Image Shown: 1010-H